| PART |
Description |
Maker |
| PS21961-AT PS21961-CT PS21961-T PS21961-TW |
Dual-In-Line Package Intelligent Power Module TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
|
| PS21205 |
TRANSFER-MOLD TYPE INSULATED TYPE
|
Mitsubishi Electric Semicon...
MITSUBISHI[Mitsubishi Electric Semiconductor]
|
| MN103SE5 MN103SFE5P |
32-bit High Performance Microcomputers MN103S Series
Transfer mode: Word transfer. Burst transfer. Intermittent transfer
|
Panasonic Semiconductor
|
| MN103SD3P |
Transfer mode: Word transfer. Burst transfer. Intermittent transfer
|
Panasonic Semiconductor
|
| 5P6SMA 5P4SMA |
5A mold isolated SCR
From old datasheet system
P gate all Diffused mold type Thyristor granted 5 A on-state Average current, with rated Voltages up to 600V
|
NEC Electronics
NEC[NEC]
NEC Corp.
|
| SI8050 SI8050S SI-8050S SI-8033 SI-8033S SI-8090S |
Full-Mold, Separate Excitation Switching Type 3 A SWITCHING REGULATOR, 60 kHz SWITCHING FREQ-MAX, PZFM5
Full-Mold/ Separate Excitation Switching Type
Power Supply Miscellaneous
|
SANKEN ELECTRIC CO LTD
Sanken Electric Co., Ltd.
Sanken Electric Co.,Ltd.
Allegro
|
| PS11013 |
Application Specific Intelligent Power Module FLAT-BASE TYPE INSULATED PACKAGE
FLAT-BASE TYPE INSULATED TYPE
|
Mitsubishi Electric Semiconductor
POWEREX[Powerex Power Semiconductors]
|
| GL538 GL537 |
Emitting Diode 5mm Resin Mold Type Infrared
From old datasheet system
フ 5mm Resin Mold Type Infrared Emitting Diode
Φ 5mm Resin Mold Type Infrared Emitting Diode
|
SHARP[Sharp Electrionic Components]
|
| SR3517-B SR3517-H |
Red colored diffusion lens type 3mm(T-1) all plastic mold type High luminosity 红色的扩散镜头类型毫米（翻译- 1）的塑料模具型高亮度
|
AUK, Corp.
AUK corp
|
| BCR20A BCR20E BCR20C |
MEDIUM POWER USE A/ B/ C : NON-INSULATED TYPE/ E : INSULATED TYPE/ GLASS PASSIVATION TYPE
MEDIUM POWER USE A, B, C : NON-INSULATED TYPE, E : INSULATED TYPE, GLASS PASSIVATION TYPE
|
Mitsubishi Electric Semiconductor
Mitsubishi Electric Corporation
|
